EM ECTF/F | Wires & Cables | Onamba Co., Ltd.

Environmentally Friendly Cable

Product name

EM ECTF/F Flame-resistant polyethylene insulated cabtire round cables with flame-resistant polyethylene sheath: Product symbols

Applicable standards	JCS 4501 Flame-resistant polyethylene cable JCS 4501 Flame-resistant polyethylene cable
Rating	Temperature 60°C Voltage 300 V or less
Certified product under the Electrical Appliances and Materials Safety Act Certified product under the Electrical Appliances and Materials Safety Act	<PS> E JET mark product (Refer to p. 97) <PS> E JET mark product (Refer to p. 97.)

Applicable standards

JCS 4501 Flame-resistant polyethylene cable

Rating

Temperature 60°C

Voltage 300 V or less

Certified product under the Electrical Appliances and Materials Safety Act
Certified product under the Electrical Appliances and Materials Safety Act

<PS> E JET mark product (Refer to p. 97)

<PS> E JET mark product (Refer to p. 97.)

Download: EM ECTF/F Flame-resistant polyethylene insulated with flame-resistant polyethylene sheath(540 KB)

Applications

Used as wiring for small-size indoor electrical equipment operating at 300 VAC or less.

Features

Flexible stranded wires are used as the conductor, for excellent flexibility.
These products do not produce dioxins, halogen gas, or other toxic gases when they are incinerated for disposal.
The amount of smoke produced during incineration is small, and no corrosive gases are produced.
Because they do not contain lead or any other heavy metals, they can be disposed of in landfill without the risk of elution.

Structural diagram

Surface marking

Insulator standard colors

2C: Black, white
3C: Black, white, red or black, white, green
4C: Black, white, red, green

Sheath standard colors

Gray

Precautions for use

Do not use these products in cable carriers, robot arms, and other environments where sliding performance and continuous bending performance are required. The flame resistant polyethylene used in the insulator and sheath tends to produce white marks (streaks) on the surface (whitening phenomenon) when the cables are strongly rubbed. This is a cable surface phenomenon and does not affect the cable characteristics, however care should be used when handling the products.

Structural table

No. of cores No. of cores	Conductor (AC) Conductor (AC)			Insulator Insulator		Sheath Thickness Sheath thickness mm	Finished Outer diameter Finished outer diameter mm	Conductor resistance Conductor resistance (20°C) Ω/km	Withstand voltage Withstand voltage (in water) V/minute (in water) V/minute	Insulation resistance Insulation resistance (20°C) MΩ・km	Maximum permissible current (reference value) Maximum permissible current (reference value) A	Approximate weight Approximate weight kg/km
	Nominal cross-section area Nominal cross-section area mm²	Configuration No. of wires / Single wire diameter Configuration No. of wires / Single wire diameter Wires/mm Wires/mm	Outer diameter Outer diameter mm	Thickness Thickness mm	Outer diameter Outer diameter mm
	Nominal cross-section area Nominal cross-section area mm²		Outer diameter Outer diameter mm	Thickness Thickness mm	Outer diameter Outer diameter mm								2C	0.75	30/0.18	1.1	0.6	2.3	1.0	6.6	25.1	1000	50	7	61
1.25	50/0.18	1.5	0.6	2.7	1.0	7.4	15.1	12	80
2.0	37/0.26	1.8	0.6	3.0	1.0	8.0	9.79	17	100
3C	0.75	30/0.18	1.1	0.6	2.3	1.0	7.0	25.1	1000	50	7	72
	1.25	50/0.18	1.5	0.6	2.7	1.0	7.8	15.1			12	97
	2.0	37/0.26	1.8	0.6	3.0	1.0	8.5	9.79			17	124
4C	0.75	30/0.18	1.1	0.6	2.3	1.0	7.6	25.1	1000	50	7	87
	1.25	50/0.18	1.5	0.6	2.7	1.0	8.5	15.1			12	116
	2.0	37/0.26	1.8	0.6	3.0	1.0	9.3	9.79			17	153